Best 20 Grease Gun Couplers

 

LockNLube Grease Gun Coupler XL – Extra reach for recessed grease fittings - Over 35″ of reach great for shielded pto shafts, axles, harvester heads, u joints and other recessed grease fittings. Includes rebuild kit easily replace seal and jaws without replacing the coupler. Rated to 10,000 psi locks on, stays on does not leak once locked on. Fits all standard grease guns, 1/8″ npt fitting fits all sae and metric zerk fittings simply replace your existing coupler. Hands free, does not pop off under pressure easily release from fittings with the thumb lever, even at extreme pressure.

 

Lock on Grease Gun Coupler, Grease Gun End, Easy Connect/Disconnect Zerk Coupler - An incredible new design that locks on the fitting with just a slight push and releases with same minimal effort. Small design allows for navigation into tighter areas than other lock on couplers. Does not drip, no matter the pressure, grease won’t leak out the sides. Fits most grease guns and accessories. Specifications •item grease coupler •brand univer-co •material steep •connection 1/8″ npt thread •unit of measure ea •max pressure 10000 psi •features locking •for use with grease gun. Easy lock on and release. No need to hold the grease gun with knees while trying to hold the coupler on the fitting as grease is pumped.

 

Milton S-3203 360 Degree Swivel Grease Gun Coupler - 360 degree swivel grease gun coupler with 3 jaw 1/8″ fnpt. Maximum working pressure 7,000 psi. Made for hand operated grease guns only.

 

Grease Gun Coupler - -For hand guns only. Dimensions overall product weight -0. -Complete with both small and large sleeves to fil all standard tip couplers. 570-05-028 features -for converting jaw-type lube couplers to steel needle points. -Dispenses fine line of grease through the needle nose. 08 pounds.

 

Grease Gun Coupler For Our # 6661 & #172 - 90 degree grease gun coupler. Manufactured to meet the pressure requirements of manual grease guns. As well as air grease guns material corbon steel zinc plated, hardened jaws,.

 

Plews 05-031 Grease Gun Coupler - Overall depth, front to back -4 inches. Dimensions overall height, top to bottom -0. 570-05-031 features product type -coupler. 05 pounds. Overall width, side to side -3. Overall product weight -0. 7 inches. 5 inches.

 

G. Gun Grease Gun – Quick and Easy Greasing – 10 Foot Flex Hose – LockNLube Grease Coupler Included – no Mess, no Waste – Industrial Strength Construction – 10,000 Psi Foot Operated - Tough & rugged, proven in the diamond and gold mines of africa over the last 25 years builds up to 10,000 psi without a sweat great to blow out those blocked grease fitting zerks or jack your crawler tracks in the field. Ideal in-field grease pump for when you can’t afford the time to take your equipment back to the shed for essential lubrication foot operated, no more flat batteries, batteries going dead in the cold, lame arms or hands two to three quick strokes adequately greases most joints. High pressure rated 10ft grease hose standard grease hard-to-reach grease fittings with ease and from a safe place shipped standard with the game changing locknlube grease gun coupler, grease goes in, not on the machine. Effortless, quick and easy greasing no more stopping greasing to clear airlocks, refill or change grease tube cartridges all the time, grease canister holds equivalent of 20 standard size grease tube cartridges. Patented pressure release valve, simply lift the treadle to release any pressure build-up in the hose grease in the hose goes back into the canister, not on the floor no more dribbling grease messing over everything no more wasted grease or stuck couplers.

 

KTI KTI73952 Grease Gun Coupler (Prof 4 Jaw) - 90 degree grease gun coupler. Manufactured to meet the pressure requirements of manual grease guns. As well as air grease guns material corbon steel zinc plated, hardened jaws,.

 

Lincoln Lubrication (LING320) 90 Degree Grease Gun Coupler - Manufactured to meet the pressure requirements of manual grease guns. As well as air grease guns material corbon steel zinc plated, hardened jaws,. 90 degree grease gun coupler.

 

LockNLube Grease Gun Coupler – Zerk Grease Coupler Fitting Tip – Easy Lock-on, Clip-off – Stays on – Grease goes in, not on the machine - Unique design locks onstays onno leaks four hardened spring steel jaws are resilient under high pressure, max 10,000 psi. Fits standard grease guns, 1/8″ npt fitting fits all sae and metric zerk fittings simply replace your existing coupler, click the orange button on the right to buy. Grease goes in, not on the machine no more grease mess everywhere. Ends the waste ends the mess ends greasing frustration.

 

Plews 05-031 Grease Gun Coupler - Maximum working pressure 4,000 psi. Fits most hand operated grease guns. Plews, standard grease gun coupler (05-031).

 

Powerbuilt 648760 Grease Gun Coupler - Ready to get serious get powerbuilt tools. 1/8″ npt threads fit most grease guns and extensions. Knurled body for ease of use.

 

Lubeq 12643 Heavy Duty Grease Gun Coupler, precision machnied jaws - Connecting thread 1/8″ npt female. With 4 machined jaws forming a superior connection between coupler and grease fitting. Our best coupler material carbon steel, zinc plated with hardened jaws. Length overall 157″. Diameter 059″ with machined shanks 0492″.

 

Univer-Co Lock-On Grease Gun Coupler - Specifications •item grease coupler •brand univer-co •material steep •connection 1/8″ npt thread •unit of measure ea •max pressure 10000 psi •features locking •for use with grease gun. Fits most grease guns and accessories. No more holding the grease gun with knees while trying to hold the coupler on the fitting as grease is pumped. No matter the pressure, grease won’t leak out the sides. An incredible new design that locks on the fitting with just a slight push and releases with same minimal effort. Small design allows for navigation into tighter areas than other lock on couplers.

 

Performance Tool W54212 Grease Gun Coupler - Country of origin china. Fits most hand operated grease guns. Maximum working pressure 3,000 psi.

 

HORUSDY Grease Gun Coupler, Zerk Grease Coupler, Quick Lock-on and Free up Both Hands to Operate Your Grease Gun - Works with all grease gun types, pneumatic, manual and battery. 4 hardened spring steel jaws reilient under high pressure, durable nitrile rubber seal for longevity under high pressure. 1/8″ bsp (f) thread, fits all metric and sae specification grease nipples, maximum working pressure of 10,000psi (690 bar). No need to hold while greasing, lock-on and free up both hands to operate your grease gun, easy clip-off, regardless of pressure build up in the line. Sliding sleeve locks the quick release coupler onto the nipple, suitable for high pressure, heavy duty greasing applications.

 

CTA Tools 7762 Coupler Right Angle Grease Gun - This masterfully crafted right angle grease gun coupler is configured to conform to the u. Cta tools 7762 grease gun coupler, right angle is expertly crafted and precision designed to meet the expected cta tools high standards of quality and craftsmanship. California prop 65, warning, this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. S. Standard national pipe thread (npt) measurement of 1/8-inches and further offers a working pressure of up to 3,000 psi (pressure per square-inches). Heavy-duty construction allows for strength and durability. Whether tuning up your ’68 corvette or changing the oil on a john deere tractor, cta can supply you with the tools needed to do the job. This right angle grease gun coupler is designed for uses requiring straight extensions 
or flexible hoses.

 

Performance Tool W54224 Hd Grease Gun Coupler - Fits most hand operated grease guns. Burst pressure 8,000 psi. Maximum working pressure 4,000 psi.

 

National Spencer 360 Degree Swivel Coupler for Grease Guns 1/8 Inch NPT (M),48. - All food graded goods are exempt from being returned. 360° swivel coupler for grease guns 1/8 inch npt (m) case of 6 units description 360º swivel coupler assembly 1/8 inch npt (m). Application where more than one grease gun coupler is needed eliminates the need for multiple grease guns saves time changing tips returns our policy lasts 30 days. If a seal of a tote, drum, pail, or case is damaged, you will not be eligible for a return. Re-stocking fee applies to all eligible products for return. The re-stocking fee is estimated to be 20 % of the value of the product. Please do not send your purchase back without written authorization, granted by miles lubricants llc. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. To complete your return, we require a receipt or proof of purchase.

 

CTA Tools 7760 Coupler Grease Gun - Standard national pipe thread (npt) measurement of 1/8-inches and offers a working pressure of 3,000 psi (pressure per square-inches). California prop 65, warning, this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. This grease gun coupler is engineered for exceptional durability. It is additionally equipped with four jaws and a spring
loaded ball check. Cta tools 7760 grease gun coupler is expertly crafted and precision designed to meet cta tools high standards of quality and craftsmanship. S. This coupler is configured to conform to the u. Whether tuning up your ’68 corvette or changing the oil on a john deere tractor, cta can supply you with the tools needed to do the job. Heavy-duty construction allows for strength and durability.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.